Hawk Performance Ceramic Brake Pads - Rear (08-16 A4, A5, S4, S5)

Be the first to Write a Review
$88.97
Be the first to Write a Review
$98.86
You Save $9.89
FREE Shipping
SKU: 107125
MPN: HB642Z.658

Product Details

Description

Performance Ceramic ('Z' Compound Code)

Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness) creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad.

Specs

  • Thickness: 0.658mm
  • Position: Rear

 

Product Features

  • Increased Stopping Power
  • Increased Rotor Life
  • Extended Pad Life
  • Ultra-Low Dust
  • Extremely Quiet
  • Stable Friction Output

installation

Installation Procedure

  1. Install brake pads properly. Be sure pads are securely positioned in the caliper.
  2. Flush system with fresh brake fluid.
  3. Check all hydraulic parts for excess wear and tear.
  4. Check disc for proper thickness, parallelism, and lateral runout.
  5. Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.
  6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130-grit sandpaper using moderate pressure. Use soap and water to clean disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
  7. Inspect calipers for freedom of movement. Lubricate where necessary.

Bed-In/Burnishing Instructions

  1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
  2. Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
  3. DO NOT DRAG BRAKES!
  4. Allow at least 15 minutes for the brake system to cool down.
  5. After step 4 is completed, your new Hawk Performance brake pads are ready for use.
warranty

Hawk Performance will warranty products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. Hawk Performance does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will Hawk Performance be liable for incident or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred.

Any, and all, warranty claims must be processed through Hawk Performance.

All valid warranty claims will be replaced/reimbursed with Hawk Performance brake pads of equal or greater value.

Fitment Guide

Does this fit my vehicle?
Fitment Guide
×

Fitment Guide

Start Year End Year Make Model Submodel Cyl Lit Fuel FuelDel ASP EngDesg Notes
2009 2016 AUDI A4 BASE
PREMIUM
PREMIUM PLUS
PRESTIGE
L4 2.0 GAS FI T ALL  
2009 2016 AUDI A4 QUATTRO BASE
AVANT
PREMIUM
PREMIUM PLUS
PRESTIGE
L4
V6
2.0
3.2
GAS FI ALL ALL  
2010 2014 AUDI A5 CABRIOLET L4 2.0 GAS FI T ALL  
2010 2016 AUDI A5 QUATTRO BASE
CABRIOLET
CABRIOLET PREMIUM
CABRIOLET PREMIUM PLUS
CABRIOLET PRESTIGE
PREMIUM
PREMIUM PLUS
PRESTIGE
L4
V6
2.0
3.2
GAS FI ALL ALL  
2013 2015 AUDI RS5 BASE
CABRIOLET
V8 4.2 GAS FI NA CFSA  
2010 2016 AUDI S4 ALL ALL ALL ALL ALL ALL ALL  
2008 2016 AUDI S5 ALL ALL ALL ALL ALL ALL ALL  

Customer Reviews

No reviews have been written for this product.
Write a Review