Looking to maximize the handling performance of your R8? The 034Motorsport Dynamic+ Camber Toe Kit for the Gen 1/1.5 Audi R8 is designed to allow for increased adjustability of your R8’s camber and toe alignment. The Dynamic+ Camber Toe Kit contains hand-selected products from the expansive 034Motorsport catalog, put together by the experienced 034Motorsport Engineering Team!

Camber Shim Kit:

The Audi R8 utilizes a double-wishbone front and rear suspension from the factory. This means that there is an upper and lower control arm that connects your wheels to your vehicle. The camber for the front and rear of the vehicle is controlled via the lower control arm and has a limited range of approximately 1.3°. Camber shims are added between the lower control arm and your vehicle's frame, allowing for an increased overall range of camber. You can add up to two shims per lower control arm bolt point, allowing adjustability of up to -4.3° of negative camber in the front*and -3.5° negative camber in the rear.

• Changes the Overall Camber Range and Will Not Guarantee Camber Gains Unless Aligned in That Way.
• Each Shim Will Add Approximately -0.7° in The Front and -0.5° in The Rear
• Shims are Precision Laser Cut from Aluminum Plate
• Can Be Installed with Car Loaded on Alignment Rack - Only Remove One Bolt at a Time
• New Grade 12.9 M8x1.25x30 Bolts and Washers Are Included
• Note: Staggering Shims in Front Suspension Does Not Add Caster
• Note: Loctite Required on New Bolts (Torqued to 30NM)

Toe Links:

Motorsport Adjustable Rear Toe Links were thoroughly tested on the street and track on 034Motorsport's Gen 1.5 Audi R8 4.2L V8 Development Vehicle before release. These adjustable toe links are direct replacements for the stock parts and are designed to be fully serviceable and rebuildable.

• Precise Toe Adjustment
• Eliminates All Bushing Deflection
• Improved Handling
• CNC Machined 6061-T6 Aluminum Tie Rod Bodies - Anodized Black for Durability
• CNC Machined Aluminum Rod End Spacers
• Aurora Spherical Rod Ends
• Designed For Easy, Precise, On-Car Adjustability
• Direct Drop-In Replacements for Factory Toe Links

Recommended Alignment

Front: (Tires: 255/35/19 Michelin Sport Cup 2)

• Camber: -2.2 degrees each side (034Motorsport Camber Shims)
• Caster: 6.0 degrees each side (not adjustable)
• Toe: 2.2mm (toe in)

Rear: (Tires: 315/30/19 Michelin Sport Cup 2)

• Camber: -2.4 degrees each side (034Motorsport Camber Shims)
• Toe: 2.0mm toe in (034Motorsport Adjustable Toe Arms)