034Motorsport StreetSport Engine & Transmission Mount Retrofit Kit (8P A3, MK2 TT, MK5/MK6 Golf/Jetta)
Product Details
Description
The Motorsport Line StreetSport Motor Mount Retrofit Kit for the 8P AUDI A3 VR6, 8J AUDI TTRS & TT VR6, AND MKV VOLKSWAGEN R32 is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will significantly increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to reduce engine movement compared to the factory parts but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle moves, NVH is only slightly higher than stock.
| StreetSport | TrackSport | |
| Power levels exceeding Stage 1 | Power levels exceeding conventional stages | |
| Car is launched or taken to HPDE or Drag events | Car is heavily launched at drag strips or only used for track events | |
| Car is used on the road as a commuter | Ultimate performance and rigidity is desired | |
| Less NVH is desired | "Where we're going, we don't care about NVH!" |
HARDWARE REQUIREMENTS:
This product is intended to be used in conjunction with one of the following products. The mount bases of the kits shown below are swapped with the mount bases in this kit, resulting in the same spec as our StreetSport mounts.
Product Features
- Converts TrackSport Mounts to StreetSport Mounts to Lower NVH
- Manufactured from 6061-T6 Billet Aluminum
- Anodized for Long Life and Great Looks
- Extreme-Duty for the Most Punishing Performance Applications
- Great Solution for Highly-Tuned Stock Turbo Power Levels
- Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction
- Significantly Less NVH than TrackSport Versions
- Virtually Indestructible
- Lifetime Warranty
- Updates One Set of Engine/Transmission
installation
We recommend having this mount retrofit kit installed by an experienced mechanic. The process of removing and replacing the mounts is the same as the factory mount remove and replace procedure.
For the retrofit kit parts:
- The torque values for the M10 socket head cap screws should be 60NM, with blue Loctite.
- The torque value for the M8 socket head cap screw (if applicable) is 20NM, with blue Loctite.
- The rubber isolators should be located on the engine/transmission side of the mounts (inward).
warranty
1 Year Warranty*
Customer Pictures
No images yet