Product Details
Description
Introducing the all new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.
Each RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers, No hub rings!!
Weighing just a mere 19.2 lbs, The RSe10 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight
Specs
- Size: 18x8.5
- Offset (E.T.): +45mm
- PCD (Bolt Pattern): 5-112
- Center Bore: 57.1mm
- Weight: 19.2 lbs.
2022+ 8Y RS3 Fitment Notes
- Fits vehicles with steel brakes only.
- Tight clearance -- Installer must confirm barrel to balancing weight clearance.
- +5mm minimum spacer is required to clear front brakes.
- Front fenders are much wider than the rears. For square setup, +20mm front spacer is recommended to achieve flush fitment matching the rear.
Recommended Tire Size:
*These sizes are only to be used as a guide*
*For Vehicles that are stock height or slightly lowered.*
*Extremely low vehicles may need a tire width that is smaller*
| Wheel Size | Minimum Tire Width - No Stretch | Ideal Tire Width |
| 18X8.5 - Smaller Sidewall | 225/35R18 | 235/35R18 |
| 18X8.5 - Larger Sidewall | 225/40R18 | 235/40R18 |
Wheel Bolts:
Neuspeed Wheels use the OEM wheel bolt size and design. You can reuse your OEM wheel bolts with these wheels!
- OEM Wheel Bolt Specs:
- Thread Type: 14 X 1.5"
- Thread Length: 28mm Shank
- Seat Type: Ball
- Head: 17mm Hex
Replacement OEM Wheel bolts: Otis Inc 27mm Ball Seat Wheel Bolts
Notes
- RSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.
- Every RSe wheel comes with 'RS' center cap. However, one can choose to utilize OEM Audi or VW center cap as well as mounting lug bolts, which are not included with the wheel.
- Audi cap part #: 4B0 601 170 A
- VW cap part #: 3B7 601 171
- RSe wheels utilize OEM lug bolts with R13 ball seat (Audi & VW specific)
- Compatible with Brembo, Stoptech and many other BBKs without wheel spacers/adapters.
Product Features
- DEEP CONCAVE HUB
- Weight: 19.2 lbs
- Compatible with Brembo, Stoptech and many other BBKs without wheel spacers/adapters.
- OEM TPMS (Tire Pressure Monitoring System) compatible.
warranty
1 Year Warranty
Customer Pictures
No images yet
Customer Reviews
-
RSe10 wheel experience on 2019 Audi RS 3
Longtime Neuspeed wheel customer, having had excellent performance quality over a large number of years.
Now using your product on our 2019 Audi RS 3 currently at 44,775 total miles, of which 32,238 miles have been
on fast country back road runs, 3 days a week as weather has permitted.Our 2019 Audi was originally fitted with 19-inch alloy wheels and 235/35/19 Pirelli tires. Performance was very
poor primarily due to the low quality Pirelli tires. Your RSe10 18x8.5 wheels were fitted with Michelin Pilot Sport
AS3+ 245/40/18 for use on our many country back road runs made Tues, Weds and Thursdays at 10am to 2pm
only as weather permits. Now at 44,775 miles of which 32,238 miles were high speed country back road runs
made 10am to 2pm only on Tues, Weds and Thurs as weather permitted.New Michelin 245/40/18 All Season 4 tires are currently being installed, as current tires are now exhausted
at 2.3 mm of remaining tread depth.I am currently 83 years old and have been performance driving since 1957 starting in Tucson Arizona,
now living in Purcellville VA and still making high performance drives as weather permits. Here is
a link to my now discontinued websaite at
which will give you a better idea as to my automobile activities.Your wheels always draw attention to themselves and I am frequently asked where did I get them,
which I of course tell them Neuspeed! Great products indeed and they have served me well for
a great many years.I hope the success of your products continues and that all is well at your business.
Best reagrds,
Rod Paine
Purcellville VA -
I love the looks of these wheels. The fact that they're way lighter than the OEM wheels is great. Only downside is a have hit a pothole at night and bent both passenger side wheels in a fraction of a second. Now trying to decide if i should buy 2 more or get something different