18x9.0 Neuspeed RSe52 Light Weight Wheel - Satin Gun Metallic (5x112/ET45/57.1)
Talk to an Expert
Need Help? Verify product fitments and get personalized product recommendations from a Modded Euros sales tech.
Product Details
Description
Introducing the all new RSe52 light weight wheels, the street 18-inch version of the 17-inch RSe05. Carrying the same concept from NEUSPEED's other wheel line ups, the RSe52 features smooth and simple design lines giving the 'clean' and un-overbearing but yet complimentary to your European design Audi and Volkswagen vehicles.
Each RSe52 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers, No hub rings!!
Weighing just a mere 20.75 lbs, The RSe52 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.
Please Note
Due to the variations in tire choices and suspension geometry we can not guarantee any fitment.
Specs
- Size: 18x9.0
- Offset (E.T.): +45mm
- PCD (Bolt Pattern): 5-112
- Center Bore: 57.1mm
- Weight: 21.5 lbs
2022+ 8Y RS3 Fitment Notes
- Fits vehicles with steel brakes only.
- Tight clearance -- Installer must confirm barrel to balancing weight clearance.
- Front fenders are much wider than the rears. For square setup, +20mm front spacer is recommended to achieve flush fitment matching the rear.
Recommended Tire Size:
*These sizes are only to be used as a guide*
*For Vehicles that are stock height or slightly lowered.*
*Extremely low vehicles may need a tire width that is smaller*
| Wheel Size | Minimum Tire Width - No Stretch | Ideal Tire Width |
| 18X9 - Smaller Sidewall | 235/35R18 | 245/35R18 |
| 18X9 - Larger Sidewall | 235/45R18 | 245/45R18 |
Wheel Bolts:
Neuspeed Wheels use the OEM wheel bolt size and design. You can reuse your OEM wheel bolts with these wheels!
- OEM Wheel Bolt Specs:
- Thread Type: 14 X 1.5"
- Thread Length: 28mm Shank
- Seat Type: Ball
- Head: 17mm Hex
Replacement OEM Wheel bolts: Otis Inc 27mm Ball Seat Wheel Bolts
Notes
- RSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.
- Every RSe wheel comes with 'RS' center cap. However, one can choose to utilize OEM Audi or VW center cap as well as mounting lug bolts, which are not included with the wheel.
- Audi cap part #: 4B0 601 170 A
- VW cap part #: 3B7 601 171
- RSe wheels utilize OEM lug bolts with R13 ball seat (Audi & VW specific)
Product Features
- DEEP CONCAVE HUB
- Weight: 21.5 lbs
- Compatible with Brembo, Stoptech and many other BBKs without wheel spacers/adapters.
- OEM TPMS (Tire Pressure Monitoring System) compatible.
warranty
Limited Warranty. APS warrants to the original retail purchaser who retains ownership of the vehicle on which the Product was originally installed (the “Consumer”) all of its Neuspeed products. Standard APS products carry a 1 year warranty against manufacturing and/or material defects, unless stated otherwise on individual product listing on this website.
Customer Pictures
No images yet