This is the ultimate intake upgrade for the Audi A6 Quattro, A6 allroad, and A7 Sportback 3.0T (C8). It flows 45% more than stock and reduces pressure drop. This directly translates to +19 AWHP and +17 AWFT-LBS of torque, making this a simple upgrade for more power you can feel.

Our system is a complete upgrade as it replaces all intake components from the inlet scoop to the turbo inlets. This is extremely important as focusing on the airbox alone does not address the main restrictions found in the factory intake system. Simply put, our system flows better than stock, makes more power, puts less strain on the turbocharger, looks sexy under the hood with the gorgeous carbon fiber design, and enhances the engine's sound. 

The factory turbocharger inlet pipe is a significant restriction point because it's small. It's common for most intake systems to focus only on the filter and airbox, but doing so minimizes performance. Furthermore, upgrading the turbocharger inlet pipe only minimizes performance if it still necks down to the factory or aftermarket intake airbox. We solve this by making our pipe as large as possible from the 4" filter outlet to the turbocharger inlet in one piece! This minimizes pressure drop and increases flow through the system far better than multi-piece solutions. 

Our system is made from carbon fiber and looks stunning under the hood. By using this material, we can make the wall thickness of the tubes smaller, maximizing the internal diameter and increasing performance even more! The material also allows us to make complex organic shapes necessary when working in a tight engine bay. 

The airbox on this platform is tiny and leaves nearly no room to upgrade the filter. Our system works as a heat shield but is open on the bottom and side, allowing for a larger filter and maximum airflow. This keeps air temps down and increases sound without it being overbearing. The filter is massive as well. A big filter is desirable as increasing the filtered surface area keeps the filter breathing easily for miles as it filters dirt, dust, and particles. It measures 7" by 7" with a 5.5" frontal inlet and a 4" outlet. The filter media is a washable pleated cotton gauze that can be easily cleaned for extended life or replaced.  

Our kit includes everything you need to bolt on and go. No new tuning is needed, and the product is emissions-friendly. We include all the nuts, bolts, and clamps needed for an easy installation. Lastly, thanks to our billet turbo inlet adapters, this is the only intake you'll ever need. Should you later upgrade your turbo, new, larger adapters can be installed to adapt to the larger inlets simply by swapping out the billet adapters!

Sound Clip: