DFG Tuning is proud to present their downpipe for the 2.0T Gen 3 TSI motors found in the MK7 / 7.5 GTI & FWD Audi A3.
This system is designed and manufactured in the USA allowing for a lifetime warranty on the downpipe! (Catalytic Converter has a 2 - year warranty)
Constructed from MIG welded 3" mandrel bent T304 Stainless Steel, this system will provide the increased flow need for Stage 2 & above vehicles. When the proper Stage 2 software is paired with this downpipe, you will see gains of 25 WHP or more!
Paired with your Stock or aftermarket cat-back, downpipe will provide an aggressive sound!
DFG Tuning has designed their downpipe to be compatible with the 2015-2018+ GTI and FWD A3 for both the Manual or DSG transmission.
- DFG Tuning Downpipe W/Catalytic Converter
- DFG Tuning O2 Extension Harness
- Instructions & Warranty Information
DFG Tuning MK7 GTI Downpipe W/Cat & Factory Cat-Back
DFG Tuning MK7 GTI Downpipe W/Cat & DFG Tuning Cat-back Exhaust System
Will this throw a check engine light?
Is this downpipe CARB legal?
No, at this time no aftermarket downpipe is CARB certified. Please be aware of your state and county regulations before purchasing.
Will this work with my factory Cat-back?
Yes, this downpipe is made to bolt right up to the factory cat-back or any aftermarket system that utilizes that same location and factory band clamp
Why are the O2 Sensor bungs angled?
We design the systems to have an incline or upward angle to the sensor to keep the tip of the sensor from becoming polluted.
Due to the angled design of the O2 sensor bungs, we do not recommend the use of O2 spacers as it may cause clearance issues upon re-installation of the O2 sensor.
- This product is sold for off-road use only.
- By purchasing this product, you understand this product is sold for competition use and is not legal for use in highway or street vehicles.
- 0.065” material thickness
- Lifetime Warranty
- Factory Style Engine Mounting Bracket
- Made In The USA
- MIG Welding
- T304 stainless steel
- Flex section w/ corrugated inner tubing
- Compression style clamps
- Mandrel bent
- 200 Cell Catalytic converter
Limited Lifetime Warranty
DFG Tuning LLC warrants that all its exhaust components are free from manufacturer defects. All our systems are warranted to the original purchaser against any workmanship or material defect as follows: TWO (2) YEAR or 50,000 miles on catalytic converters, and LIFETIME on the remainder of the system. Proof of purchase is required.
The warranty will be voided if proper installation procedures are not followed; the system is modified, altered, or subjected to misuse or damage from accidents.
DFG Tuning LLC will not be liable for labor charges, losses associated with the failure of any part or damages or injury to any person or property resulting from misuse or improper installation of any part subject to this warranty.
Photos of the defective part and the original order receipt must be emailed to [email protected] or the original point of purchase so that they can initiate a warranty claim.
The original product must also be returned for repair or replacement of the same part number. No refunds will be given out by DFG Tuning LLC.
Shipping of the part to and from the manufacturer is the responsibility of the purchaser. The manufacturer maintains sole discretion in determining whether a piece is under warranty and whether it will be repaired or replaced.
No other warranty expressed or implied, applies to the exhaust components, nor is any person or DFG Tuning LLC authorized to assume any additional warranty. DFG Tuning LLC does not assume responsibility for any consequential damages occasioned by the exhaust product, or inconvenience or interruption in any operation.
The warranty gives you specified legal rights, and you may have other rights which vary from state to state.
Vehicle Code Information:
DFG Tuning LLC suggests you check the Vehicle Code, Inspection and Emission Laws in your state for specific guidelines. DFG Tuning LLC does not guarantee that you will not receive a citation or receive a fine for violations of state regulations.
*Some DFG Tuning LLC exhaust components are designed for off-road use and are not legal for street use *
DFG Tuning LLC suggests that you always keep your stock exhaust components. This will allow for uninterrupted use of the vehicle should the need arise for removing your DFG Tuning systems.
Does this fit my vehicle?
|Start Year||End Year||Make||Model||Submodel||Cyl||Lit||Fuel||FuelDel||ASP||EngDesg||Notes|
CABRIOLET PREMIUM PLUS
|L4||1.8||GAS||FI||T||ALL||Does not fit AWD vehicles.|
GLI 35TH ANNIVERSARY EDITION
Mk7 GTI dfg tuning downpipe
This downpipe fit my mk7 GTI flawless. It lined up perfectly everywhere it should and sounded amazing. Nice and deep tone not raspy at all.
Sounds sweet on my 16 GTI
shipped fast, well made