Rear Set of Pads - Contains pads for Left Rear and Right Rear
HPS (‘F’ Compound Code)
When it comes to performance braking, there is no competition. This unique Ferro-Carbon compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports. Much improved braking over OE and standard replacement brake pads. Recommended for import & domestic automobiles.
- Position: Rear
- w/0.628 Thickness
- For use with TRW Rear Calipers: (Should have TRW markings on the rear caliper)
- 260mm, 282x12 or 286x12 mm rear rotor size (accommodates either size)
- Thread in (flare style) rear brake line connections
- Increased Stopping Power
- High Friction/Torque Hot or Cold
- Gentle on Rotors
- Extended Pad Life
- Low Dust
- Virtually Noise-Free
- Install brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral runout.
- Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.
- If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130-grit sandpaper using moderate pressure. Use soap and water to clean disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
- Inspect calipers for freedom of movement. Lubricate where necessary.
- After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
- Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
- DO NOT DRAG BRAKES!
- Allow at least 15 minutes for the brake system to cool down.
- After step 4 is completed, your new Hawk Performance brake pads are ready for use.
Hawk Performance will warranty products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. Hawk Performance does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will Hawk Performance be liable for incident or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred.
Any, and all, warranty claims must be processed through Hawk Performance.
All valid warranty claims will be replaced/reimbursed with Hawk Performance brake pads of equal or greater value.
Does this fit my vehicle?
|Start Year||End Year||Make||Model||Submodel||Cyl||Lit||Fuel||FuelDel||ASP||EngDesg||Notes|
|ALL||For use with TRW Rear Calipers: (Should have TRW markings on the rear caliper)|
|2010||2014||VOLKSWAGEN||GTI||ALL||ALL||ALL||ALL||ALL||ALL||ALL||For use with TRW Rear Calipers: (Should have TRW markings on the rear caliper)|
|2015||2020||VOLKSWAGEN||GTI||ALL||ALL||ALL||ALL||ALL||ALL||ALL||Only fits Performance Package vehicles!|
|2005||2006||VOLKSWAGEN||JETTA||TDI||L4||1.9||DIESEL||FI||T||BRM||MK5 models- for use with TRW Rear Calipers: (Should have TRW markings on the rear caliper)|
|L5||2.5||GAS||FI||NA||ALL||For use with TRW Rear Calipers: (Should have TRW markings on the rear caliper)|
|L4||2.0||GAS||FI||T||ALL||For use with TRW Rear Calipers: (Should have TRW markings on the rear caliper)|
TDI CUP EDITION
|L4||2.0||DIESEL||FI||T||ALL||For use with TRW Rear Calipers: (Should have TRW markings on the rear caliper)|
|2006||2010||VOLKSWAGEN||PASSAT||ALL||ALL||ALL||ALL||ALL||ALL||ALL||Only fits models without rear sensors.|
No images yet