Hawk Performance Ceramic Brake Pads - Rear (A4, A6, Beetle, Golf, Jetta, Passat)

LOWEST PRICE GUARANTEED
$139.49
$154.99
You Save $15.50
FREE Shipping
SKU: 102330
MPN: HB364Z.587

Product Details

Description

Performance Ceramic ('Z' Compound Code)
Hawk Performance offers a premium, high performance, ultra-low dust, low noise compound called Performance Ceramic.

Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness) creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad.

Specs

  • Position: Rear
  • w/0.587 Thickness

Notes

  • Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Product Features

  • Extremely quiet–engineered to reduce brake NVH (Noise, Vibration and Harshness)
  • Increased Stopping Power
  • Increased Rotor Life
  • Extended Pad Life
  • Ultra-Low Dust
  • Stable Friction Output

installation

Installation Procedure

  1. Install brake pads properly. Be sure pads are securely positioned in the caliper.
  2. Flush system with fresh brake fluid.
  3. Check all hydraulic parts for excess wear and tear.
  4. Check disc for proper thickness, parallelism, and lateral runout.
  5. Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.
  6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130-grit sandpaper using moderate pressure. Use soap and water to clean disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
  7. Inspect calipers for freedom of movement. Lubricate where necessary.

Bed-In/Burnishing Instructions

  1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
  2. Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
  3. DO NOT DRAG BRAKES!
  4. Allow at least 15 minutes for the brake system to cool down.
  5. After step 4 is completed, your new Hawk Performance brake pads are ready for use.

warranty

Fitment Guide

Does this fit my vehicle?

Fitment Guide
Start Year End Year Make Model Submodel Cyl Lit Fuel FuelDel ASP EngDesg Notes
2002 2005 AUDI A4
A4 QUATTRO
BASE
AVANT
L4 1.8 GAS FI T AMB  
1998 2001 AUDI A6 BASE V6 2.8 GAS FI NA ALL  
2002 2004 AUDI A6 BASE V6 3.0 GAS FI NA ALL  
1998 2010 VOLKSWAGEN BEETLE ALL ALL ALL ALL ALL ALL ALL  
1993 1999 VOLKSWAGEN GOLF CELEBRATION EDITION
CITY
GL
GTI
JAZZ
K2
LIMITED EDITION
SPORT
TREK
WOLFSBURG EDITION
L4 2.0 GAS FI NA ABA  
1999 2006 VOLKSWAGEN GOLF GL
GL TDI
GLS
GLS TDI
GLX
GTI
GTI 1.8T
GTI 20TH ANNIVERSARY
GTI 337
GTI GLS
GTI GLX
GTI VR6
R32
ALL ALL ALL ALL ALL ALL  
1993 1999 VOLKSWAGEN JETTA CELEBRATION EDITION
CITY
GL
GLS
GT
JAZZ
K2
LIMITED EDITION
TREK
WOLFSBURG EDITION
L4 2.0 GAS FI NA ABA  
1994 1999 VOLKSWAGEN JETTA GLX V6 2.8 GAS FI NA AAA  
1999 2005 VOLKSWAGEN JETTA GL TDI
GLS TDI
L4 1.9 DIESEL FI T ALL  
1999 2005 VOLKSWAGEN JETTA GL
GLS
L4 2.0 GAS FI NA ALL  
1999 2004 VOLKSWAGEN JETTA GLI
GLS
GLX
V6 2.8 GAS FI NA ALL  
2000 2005 VOLKSWAGEN JETTA GL
GLI
GLS
WOLFSBURG EDITION
L4 1.8 GAS FI T AWD
AWP
AWW
 
1998 2005 VOLKSWAGEN PASSAT ALL ALL ALL ALL ALL ALL ALL  

Customer Pictures

No images yet

Customer Reviews

No reviews have been written for this product.
Write a Review