The iSWEEP oil pan is produced by a CNC process which cuts out the pan from 6061 - T6 aluminum. The design places cooling fins on the entire lower side of the oil pan which will help stabilize the oil temperature under severe running conditions such as experienced during track days or circuit racing. 

The oil capacity can be increased by about 1 liter. Inside the oil pan, baffles have been placed to prevent oil from being pulled away from the pickup even during high G cornering.

The drain bolt was arranged in two places on the right and left of the oil pan, making it possible to completely drain old oil inside the oil pan. Since the service port is arranged on the side, you can easily install an external oil temperature gauge by replacing it with the attached 1/8 TP sensor adapter (standard equipment).

• Factory Oil Level Sensor Mounting Provision
  OEM oil level sensor mounts directly on the iSWEEP oil pan. Its position is adjusted to sense the additional 1 quart/liter of motor oil, a good warning system like your fuel gauge. When the oil level warning goes off you still have a good buffer before the oil actually goes bellow factory recommended level. 

• OEM+ Size
  iSWEEP oil pan sits above subframe and compatible with factory plastic undertray. No modification, straight bolt-on using factory screws and gasket. Compatible with all iSWEEP chassis braces.