Unitronic Stage 1+ ECU & Stage 2 DSG Combo (18-20 A5 Quattro 2.0T DSG)

LOWEST PRICE GUARANTEED
$1,200.00 (UniConnect+ device sold separately)
FREE Shipping
SKU: 118514
MPN: ECU-20TSI-MLB-A5-1+ | DSG-DL382-A5-2
$1,200.00 (UniConnect+ device sold separately)

Product Details

Description

“Unitronic

Stage 1+ ECU Upgrade

Performance Software Precisely Engineered for a completely stock 2018-2020 B9 A5 Quattro with DSG transmission. Performance Software for your ECU Box Code is subject to availability.

Gas type
93 Octane / 98 Ron gas

Installation
Flashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)

Uniconnect+
This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage. Learn More

Performance Gains: +59HP / +73TQ

Features

  • Optimized Responsiveness, Smoothness, Drivability, and Comfort
    Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.
  • Ignition Timing Precisely Calibrated for Higher Octane Fuel
    Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.
  • Optimized Maximum Output
    Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.
  • Factory Safety Limiters Retained
    OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.
  • Power Delivery Perfectly Optimized Throughout the Power Band
    Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.
  • Speed Governor Removed
    Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)
  • Improved Fuel Efficiency
    Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.
  • Engineered with Strict Industry Standards
    With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.
  • Extensively Tested Under Various Driving Conditions
    Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.
  • Full Staged Software Suite
    Includes all Stage 1+ tune variants and all lower software stages as well.

Dyno Graph

2.0 TSI Gen3 MLB Stage 1+ Dyno Reults

Stage 2 DSG Upgrade

DSG Software recommended when using a Unitronic Stage 1 or 1+ performance software. Performance Software for your TCU Box Code is subject to availability.

Installation
Flashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)

Uniconnect+
This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage. Learn More

Features

  • Increased Torque Limiters
    Unitronic's Stage 2 TCU Performance Software calibrations increase TCU torque limiters to allow for an increased output and has been developed alongside Unitronic's Stage 2 ECU Performance Software for the ultimate overall experience.
  • Dual Setpoint Adjustable Launch Control
    Unitronic has adjusted the launch control RPM setpoints to allow for quicker acceleration off the launch control. Dual-stage launch control allows users to choose between two different launch control RPM setpoints based on the current conditions observed. (surface conditions, tires, etc.) Launch Control Setpoint 1 (3500 RPM) is activated at 100% pedal position, without engaging the kick-down switch. Launch Control Setpoint 2 (4000 RPM) is activated at "110%" pedal position. (100% pedal position with the kick-down switch engaged)
  • Gear Display Enabled in D and S Mode
    Gear Display is enabled, allowing the driver to see the current gear in both D- and S-mode on the Virtual Cockpit / MFD.**
    (D1, D2, D3, etc.& S1, S2, S3, etc.)
    **Some exclusions apply. Contact Unitronic for more information.
  • Quicker Gear Shifts
    Unitronic's TCU Performance Software calibration enhances the gear shift speeds making them up to 70% quicker.
  • End-User Programmable with UniCONNECT+
    Flash your TCU from the comfort of your own home or garage. Within minutes, you'll be enjoying an entirely transformed driving experience.
  • Full Staged Software Suite
    Includes all Stage 2 tune variants and all lower software stages as well.

Related Hardware

Product Features

  • Optimized Responsiveness, Smoothness, Drivability, and Comfort
  • Ignition Timing Precisely Calibrated for Higher Octane Fuel
  • Optimized Maximum Output
  • Factory Safety Limiters Retained
  • Power Delivery Perfectly Optimized Throughout the Power Band
  • Speed Governor Removed
  • Improved Fuel Efficiency
  • Engineered with Strict Industry Standards
  • Extensively Tested Under Various Driving Conditions

Kit Contains

Qty Part Brand
1 Unitronic Stage 1+ ECU Tune (18-20 A5 Quattro 2.0 TSI MLB) Unitronic
1 Unitronic Stage 2 DSG Tune (18-20 A5 Quattro DSG) Unitronic

warranty

Lifetime Warranty on Hardware & 15-day Satisfaction Guarantee on Performance Software

Unitronic Warranty Information

Fitment Guide

Does this fit my vehicle?

Fitment Guide
Start Year End Year Make Model Submodel Cyl Lit Fuel FuelDel ASP EngDesg Notes
2018 2020 AUDI A5 QUATTRO CABRIOLET PREMIUM
CABRIOLET PREMIUM PLUS
CABRIOLET PRESTIGE
COUPE PREMIUM
COUPE PREMIUM PLUS
COUPE PRESTIGE
L4 2.0 GAS FI T ALL For DSG (dual clutch) transmissions only. 
2018 2021 AUDI A5 QUATTRO SPORTBACK PREMIUM
SPORTBACK PREMIUM PLUS
SPORTBACK PRESTIGE
L4 2.0 GAS FI T ALL For DSG (dual clutch) transmissions only. 

Customer Pictures

No images yet

Customer Reviews

No reviews have been written for this product.
Write a Review